Cân sấy ẩm Kett FD-800

Specifications

FD-800

Measurement method

Detection of weight loss by heating & drying

Sample mass

0.1-120g (optional weight sampling)

Measurement subject

Moisture / Solid content / Weight

Measurement range

0-100% (wet base, solids); 0-500% (dry base)

Repeatability (standard deviation)

Sample with a weight of 5g or higher : 0.05%
Sample with a weight of 10g or higher : 0.02%)

Resolution

Moisture percentage 0.01% / 0.1%; Weight 1 mg Temperature setting range for thermistor (T1): 30 - 180°C (1°C interval); for radiation thermometer (T2) 30 - 250°C (1°C interval)

Measurement modes

Automatic stop mode, Timer stop mode, Rapid drying mode, Equilibrium drying mode, Step drying mode, Predictive (comparative) measurement mode

External output

RS-232C interface

Environmental conditions

Temperature 5~40°C , Humidity : max of 85%RH Pollution degree 2 , Altitude up to 2000m

Sample dish

SUS (diameter 130 mm, depth 13 mm)

Heat source

Mid-wave infrared quartz heater (200Wx2)

Power source

AC100~120V / 220~240V (50/60Hz)

Power consumption

Max 900W

Dimensions & weight

220(W)x415(D)x190(H), 4.5kg ,
Shipment 310(W)x580(D)x400(H), 10kg

Accessories

Spare sample pan, Aluminum sheets, etc

Options

Printer Set (VZ-330, Printer Cable: VZC-14) 10x Printer paper rolls, 500x Aluminum sheets Radiation thermometer calibration kit GF-200 (digital thermometer, standard heating sample), FD- 800 Data logger software FDL-01 (RS-232C cable, USB-RS232C conversion cable), Windshield with deodorizer case FW-100